XAT 2020 Quantitative Ability Section - What To Expect

XAT 2020 - What Is A Good Number of Attempts For The Quantitative Ability Section?

The XAT 2020 paper pattern is unlikely to change as compared to XAT 2019, and no notification related to a change in paper pattern has been released by XLRI Jamshedpur. Based on the difficulty level of the QA section in the past 5 years, the following is an estimate of a good number of attempts with 80% accuracy to crack the QA section of XAT:

Note - The following table encapsulates data that is an estimate based on assessments carried out by leading and reputed MBA portals in India, and the number of good attempts may vary for the XAT 2020 Quant section.

XAT Quantitative Ability Review - Number of Good Attempts
Year	Total No. of Questions	Number of good attempts
2019	27	18-20
2018	27	18-20
2017	27	18-20
2016	29	17-19
2015	33	18-20

XAT Quantitative Ability Section Review - Previous Years' Cut-Offs

The following were the cut-offs for the QA section of XAT conducted in 2019 and 2018. The cut-offs differ for male and female candidates, and have been segregated accordingly.

XAT Quantitative Ability Cut-Offs: Male Candidates

XAT Quantitative Ability Sectional Cut-Offs - Male Candidates
		QA Cut-Off (Percentile)		Overall Cut-Off (Percentile)
Year	Number of Questions	BM	HRM	BM	HRM
2019	27	90	72	96	94
2018	27	88.7	70	94	92

XAT Quantitative Ability Cut-Offs: Female Candidates

XAT Quantitative Ability Sectional Cut-Offs - Female Candidates
		QA Cut-Off (Percentile)		Overall Cut-Off (Percentile)
Year	Number of Questions	BM	HRM	BM	HRM
2019	27	75	67	95	93
2018	27	80	65	94	92

XAT 2019 - Quantitative Ability Section Review

The following was the analysis of XAT 2019's QA section by leading MBA portals in India:

• TIME - "The section had a mix of few easy and mostly moderate-difficult questions. There were quite a number of questions which were tricky and required a thorough understanding of concepts; few others required intensive calculations also."
  
• CL - "Questions from Arithmetic were doable whereas the ones on Geometry were difficult. In DI, there were 2 sets comprising 6 questions in total. Few questions were ambiguous. One DI question on the proportion of Economists and that of Engineers was incorrect. One QA question on roots was incorrect since x was mentioned in the root. Students could have attempted 2-3 DI questions and 13-15 Quant questions in about 65-70 minutes."
• IMS - "This section had a few sitters, which should not have been left. Some questions were difficult with close options. 1 question in one DI set could not be answered because of inadequate/ambiguous data, as per students’ feedback. An attempt of about 18-19 questions (with about 80 percent accuracy) in about 55 minutes  would be considered a good attempt."

XAT 2019 - Quantitative Ability Review
Topic	No. of Questions
Geometry & Mensuration	6
Data Interpretation	6
Coordinate Geometry	2
Data Sufficiency	2
Statistics	1
Profit & Loss	1
Quadratic Equations	1
Logarithms	1
Indices and Surds	1
Percentages	1
Simple Interest & Compound Interest	1
Inequalities And Modulus	1
Ratio, Proportion and Variation	1
Number Systems	1
Miscellaneous	1
Total	27

XAT 2018 - Quantitative Ability Section Review

The following was the analysis of XAT 2018's QA section by leading MBA portals in India:

• TIME - "The section was a mix of mostly easy and a few moderate-difficult questions. There were only a few questions which were tricky and required a thorough understanding of concepts. The section was overall lower in difficulty level compared to last year’s Quant section. There were six questions from two DI sets and both these sets were of moderate difficulty level. The questions were easy to solve, however, the scrolling up and down to look at the data made it a little difficult for the students to comprehend the information given in the sets. With slightly easier section as compared to last year’s, the number of attempts is bound to go up. An attempt of 18-20 with an accuracy of about 80% can be considered to be a good bet."
  
• IMS - "Students have reported that at least 2 questions (one each on Progressions and Circles) were ambiguous. There were two Data Interpretation sets, with 3 questions each. One set was a logical Data Interpretation based on a hockey tournament, which was rather simple. The other set consisted of as many as 4 graphs with multiple data sets. That set should have been attempted only after attempting other questions if time permitted. Overall, the level of difficulty of the section was slightly lower than that of  XAT-2017. In 60 minutes, about 19-20 attempts with 80%-85% accuracy will be considered good."

XAT 2018 - Quantitative Ability & Data Interpretation Review
Topic	No. of Questions
Data Interpretation	6
Geometry & Mensuration	4
Number Systems	2
Data Sufficiency	2
Time, Speed and Distance	2
Time & Work	1
Profit & Loss	1
Averages, Mixtures, Alligations	1
Trigonometry	1
Ratio, Proportion and Variation	1
Simple Equations	1
Inequalities And Modulus	1
Set Theory	1
Quadratic Equations	1
Probability	1
Number Series	1
Total	27

Take a look at the XAT 2018 question paper here.

XAT 2017 - Quantitative Ability Section Review

The following was the analysis of XAT 2017's QA section by leading MBA portals in India:

• CL - "The section on Quantitative Ability and Data Interpretation was slightly easier than last year’s. However, one of the DI set was quite tricky. There were 17 questions of QA and most of them were from Geometry and Algebra.  Majority of the questions from Arithmetic were doable whereas the questions on Geometry were difficult in nature. There were two case let questions based on sports. In Data Interpretation, there were 2 sets comprising 8 questions in total. There were a few questions which were a little ambiguous. In a nutshell, one could have attempted 4-6 DI questions and 14-16 Quant questions in 55 minutes."
• IMS - "Questions on Quantitative Ability were dominated by Geometry, Modern Mathematics and Arithmetic. There was one Data Sufficiency set with two questions. Unlike in XAT-2016, no questions were confusing and/or incorrect. There were two Data Interpretation sets, with 4 questions each. The set on Table was fairly calculation intensive but doable. The other set on Tables and Scatter Plot was very complicated in terms of the representation of the data. This set tested the concepts in statistics. Students, who were familiar with the concepts such as correlation, mode etc. would have found the set manageable. This set should have been best left. Overall, the level of difficulty of the section was slightly lower as compared to XAT-2016. In 60 minutes, about 15-17 attempts with 80% accuracy will be considered good."

XAT 2017 - Quantitative Ability Review
Topic	No. of Questions
Data Interpretation	8
Geometry, Mensuration	4
Data Sufficiency	2
Simple Equations	2
Number Systems	1
Time, Speed and Distance	1
Time & Work	1
Trigonometry	1
Maxima-Minima	1
Set Theory	1
Probability	1
Functions	1
Sequence and Series	1
Indices & Surds	1
Miscellaneous	1
Total	27

Take a look at the XAT 2017 question paper here.

XAT 2016 - Quantitative Ability Section Review

The following was the analysis of XAT 2016's QA section by leading MBA portals in India:

• IMS - "The Quantitative Ability-Data Interpretation section was slightly easier than XAT-2015. Questions on Quantitative Ability were dominated by Geometry and Arithmetic. At least two questions on Arithmetic also combined the concepts of Geometry. There were four questions on Numbers, out of which one question was incorrect. Further, there were three questions on Modern Mathematics. There was no question on Logarithms, Permutation-Combination or Probability. One question was on Logical Data Sufficiency.There were two Data Interpretation sets, one with 4 questions and the other with 3 questions. The set with 4 questions on salaries involved a complex combination of a box plot and line graph with medium to difficult questions. The other set with 3 questions on crops had a table and was characterized by Easy to Medium level of difficulty questions. The set on table should have been attempted while the set on box plot should have been attempted at the end. Overall, the level of difficulty of the section was slightly lower as compared to XAT-2015. In 60 minutes, about 17-19 attempts with 80% accuracy will be considered good."
• TIME - "The set was a mix of doable and difficult questions. There were questions which were tricky as well and there were some which could have done with slightly better clarity (the tiles question and the question on pipes). The questions required a thorough understanding of concepts. The section was overall, a lot more doable than the last year's QA-DI. There were 8 questions from DI in 2 sets and both these sets were tough to crack. The set on categorization can do with more clarity and the set on salaries had a thoroughly confusing graph. Both these sets were best left out. Ideal time distribution for the section would be around 50 min."

XAT 2016 - Quantitative Ability Review
Topic	No. of Questions
Data Interpretation	7
Geometry & Mensuration	7
Number Systems	4
Time, Speed and Distance	3
Data Sufficiency	2
Time & Work	1
Profit & Loss	1
Ratio, Proportion and Variation	1
Set Theory	1
Probability	1
Functions	1
Total	29

Take a look at the XAT 2016 question paper here.

XAT 2015 - Quantitative Ability Section Review

The following was the analysis of XAT 2016's QA section by leading MBA portals in India:

• IMS - "The section was characterized by majorly easy to medium Quantitative Ability questions and difficult Data Interpretation questions. Quantitative Ability was dominated by Geometry, Modern Mathematics and Arithmetic questions. There was no question on Logarithms or Permutation and Combination. There was one question on Data Sufficiency. One question on Number Theory (factorials) was confusing. There were two Data Interpretation sets of 4 questions each. One set on tables was significantly calculation-intensive while the other Data Interpretation set contained multiple graphs and was fairly complicated. Both the Data Interpretation sets were best left to be attempted at the end. Overall, the level of difficulty of the section was lower as compared to XAT-2014. In 50-55 minutes, about 18-20 attempts with 80% accuracy will be considered good."
• CL - "The section on Quantitative Ability and Data Interpretation was slightly more difficult than last year’s. There were 25 questions of QA and most of them were from Geometry, Algebra, Number System and Arithmetic. Majority of the questions from Arithmetic were doable whereas the questions on Geometry and Algebra were difficult in nature. There was one question based on directions whose language was ambiguous. One could have attempted 9-11 questions (QA) in 35-40 minutes. In Data Interpretation, there were 2 sets of 4 questions each. One out of these two sets was based on unusual graphs. The other table-based set that required intensive calculation was doable and the first two questions of this set could be easily attempted.
  In a nutshell, one could have attempted 3-5 DI questions in 20-25 minutes."

XAT 2015 - Quantitative Ability Review
Topic	No. of Questions
Data Interpretation	8
Geometry & Mensuration	8
Number Systems	3
Sequence & Series	2
Functions	2
Data Sufficiency	1
Profit & Loss	1
Averages, Mixtures, Alligations	1
Trigonometry	1
Simple Equations	1
Simple Interest & Compound Interest	1
Probability	1
Percentages	1
Statistics	1
Maxima-Minima	1
Total	33

Take a look at the XAT 2015 question paper here.

Have questions about the XAT paper pattern, or the B-schools that accept XAT scores? Find answers to your questions here.

XAT 2020 aspirants should also read:

• How To Crack The VA-RC And DM Section of XAT 2020
• The Right Strategy To Crack XAT - Tips From A XAT 99.73%iler
• CAT and XAT - Why They're Two Sides of The Same Coin